Bolígrafo 3Doodler Start+ para niños

3D printing pen for children from 6 years old 3Doodler Start Plus, Basic Set.

3Doodler is one of those fantastic ideas that seem so obvious in hindsight that it's hard to believe that they are only now being implemented.

The premise is simple: the 3Doodler Start pen draws with a heated ECO cartridge, which gives you the ability to build 3D objects in the same way as a 3D printer, but without creating computer models.

Using the 3Doodler Start pen is incredibly simple. To start creative fun, just place the selected color of the ECO-insert in the guide and after a while your child can start creating. The only limitation is your own creativity.

What distinguishes 3Doodler Start+:

- The plastic coming out of the 3Doodler Start+ is warm, but not hot . Therefore, after the insert comes out, the child can safely shape it as he pleases with his hands.

- 3Doodler Start+ and the ECO inserts attached to it have been specially designed to be completely safe for children .

- ECO inserts for 3Doodler Start+ are made of safe, non-toxic, BPA-free and completely biodegradable materials.

- Once fully charged, 3Doodler Start+ will operate wirelessly for 45-60 minutes. Of course, you can still use it while it is connected to power.

Set includes:

- 3Doodler Start+ pen

- 2 packs (48 pieces) of ECO cartridges

- USB cable

- Instructions in Polish with a project book

Technical data:

- Printing material: ECO-cartridges

- Heating temperature: 65°C

- Length of a single ECO insert after melting: 150cm

- Printing speed: 10mm/s

- Operating time after fully charged (wireless): 45-60 min.

- Maximum power: 5W

- Power supply: 5V (USB)

- Nozzle diameter: 0.77mm

- Length of the ECO insert: 15cm

- ECO insert diameter: 2.5mm

- Product dimensions: 138x35x41mm

- Product weight: 91g

- Packaging dimensions: 220x190x70mm

- Package weight: 463g

How does 3Doodler Start work?:

Pen Nozzle - The plastic coming out of the pen hardens after a few seconds, giving you time to shape it to perfection

LEDs - Red: Refill warming up, Green: Pen ready to use, Yellow: Pen connected to charging

Micro USB port - Place to connect the power supply

Cartridge feed button - Click once to start, click a second time to stop the cartridge feed. A quick double-click will cause the cartridge to retract. It takes 10-15 seconds for the new cartridge to warm up and then you can start drawing in 3D

Pen Launch Button - Slide the button to turn the pen on or off. Wait 1 minute for the pen to warm up

Place to place the refill - Choose a color and place the refill in the pen, press until you feel resistance.